Logo XS Menu
XS En

Laboratory Sensors

XS SENSORS: IDEAL FOR YOUR ELECTROCHEMICAL MEASUREMENTS

The pH electrode is a sensor with a glass membrane that is sensitive to H+ ion activity. It transforms this activity into a proportional electrical signal.

This electrical signal via a digital instrument (pH meter) is transformed into pH units.

The electrodes marketed by Giorgio Bormac srl are produced by a leading Swiss Manufacturer and are synonymous with precision and quality. The line of electrodes marketed includes a wide range of electrodes suitable for a wide variety of applications ranging from the food industry to the chemical industry, from environmental analysis to quality control; they are suitable for both laboratory measurements and complex industrial processes. Contrary to what is sometimes thought, there is no universal electrode, but there are different electrodes specific to each application. Choosing a suitable electrode is critical to the quality of the measurement itself and to the life of the electrode; using an unsuitable electrode can result in measurement error and significantly reduce the life of the electrode.

The pH sensor consists of 2 electrodes, a measuring electrode and a reference electrode. The measuring electrode has a glass membrane, which is sensitive to H+ ion activity.

The reference electrode is constructed of a silver wire coated with silver chloride immersed in a liquid or semisolid electrolyte. The advancement of technology has made it possible to combine the 2 electrodes into a single body, the sensor built with this technology is called a combined monotubular electrode. The electrode, when measuring, should operate in a vertical position, with open side refill cap (only for electrodes with refillable electrolyte) with the membrane and side ceramic diaphragm fully immersed in the sample. Once immersed, it should be shaken for a few seconds and wait for measurement stability. When the measurement is finished, wash the electrode with distilled water, dry it with paper, without rubbing, and store it in the storage solution. It is important not to store the electrode in distilled water, as it makes the measurement very slow, and irreparably damages the electrode.

The pH electrode is an active sensor; it generates a potential, so it depletes its effectiveness over time. Indicatively, the average lifespan of an electrode is one to three years at room temperature, while at high temperatures it is drastically reduced.

Another factor that determines the life of the electrode is the aggressiveness of the sample in which it is immersed; opposite extremes of measurement ( pH 0-2 and pH 12-14) reduce the life and efficiency of the measuring membrane.

Products

77 products available in this category.

pH Electrode BORMAC BLU 5MT

pH Electrode BORMAC BLU 5MT

Cod: 32105049 Details
pH

pH

Cod: 32105209 Details
ORP Electrode BORMAC yellow 1m

ORP Electrode BORMAC yellow 1m

Cod: 32105309 Details
XS Sensor Standard T DHS BNC

XS Sensor Standard T DHS BNC

Digital combined pH electrode with DHS technology. Cylindrical membrane, general purpose. Refillable 3M KCl electrolyte. Excellent chemical resistance and easy to clean. With serial number and certificate.Dimensions (WxD) mm 120x12 - pH 0...14

Cod: 32200123 Details
XS Sensor Flow Temp-BNC DHS

XS Sensor Flow Temp-BNC DHS

Digital combined pH electrode with DHS technology. Glass body. Refillable 3M KCl electrolyte. With collar diaphragm for measurements in suspensions and low conductivity samples. With serial number and certificate.Dimensions (WxD) mm 120x12. pH

Cod: 32200133 Details
XS Sensor 2 Pore F Temp-BNC DHS

XS Sensor 2 Pore F Temp-BNC DHS

Digital combined pH electrode with DHS technology. Plastic body (PEEK) and glass membrane. Polymer-filled, maintenance-free. Thanks to the 6 mm tip it is ideal for meat and cheese and penetration measurements.Dimensions (WxD) mm 35x6 - pH 0...14,

Cod: 32200143 Details
XS Sensor Gel S7

XS Sensor Gel S7

Combined pH electrode, screw head S7. General purpose glass body. Cylindrical membrane. Maintenance-free gel filling Dimensions (WxD) mm 120x12 - pH 0...14 -Temperature -10...60 °C

Cod: 32200203 Details
XS Sensor Micro S7

XS Sensor Micro S7

Combined pH electrode, screw head S7. Micro 3" glass body. 3M KCl refillable electrolyte. For small sample volumes <2 ml.Dimensions (WxD) mm 60 x 3 - pH 0...14 - Temperature 0...100 °C

Cod: 32200213 Details
XS Sensor Polymer S7

XS Sensor Polymer S7

Combined pH electrode, screw head S7. General purpose glass body. Cylindrical membrane. Polymer filling without porous septum. For fast response with high accuracy in samples that may contaminate normal diaphragms. Maintenance-free.Dimensions (WxD)

Cod: 32200223 Details
XS Sensor Standard ORP S7

XS Sensor Standard ORP S7

Combined Redox electrode, screw head S7. Glass body. Filled with 3M KCLDimensions (WxD) mm 120x12 - Temperature -10...100 °C

Cod: 32200233 Details
XS Sensor Food Slim S7

XS Sensor Food Slim S7

Combined pH electrode, screw head S7. Glass body. Electrolyte Glycerin KCl. Suitable for protein-containing samples. 6 mm tip for penetration measurements.Dimensions (WxD) mm 25x6 - pH 0...14 - Temperature -10...100 °C

Cod: 32200243 Details
XS Sensor Micro P S7

XS Sensor Micro P S7

Combined pH electrode, screw head S7. Micro 3" glass body. With refillable Glycerin KCI electrolyte. For measurements in small sample volumes, biochemical and microbiological applications.Dimensions (WxD) mm 60 x 3 - pH 0...14 - Temperature 0...100

Cod: 32200253 Details