Digital

Italian team experts in electrochemistry have developed this new line of portable Oxygen meter.

Finding the right balance between design and easy to use.
An elegant and ergonomic case, with practical soft rubber and IP57 protection, contains the best of technology. A large display (backlight for OXY 70) shows all information that you need about the measurement, calibration points and instrument's memory (OXY 70).
Only 4 keys for OXY 7 (6 for OXY 70) allow the user to control all functions in intuitive and easy way.

...only for OXY 70
This instrument is equipped with technology of optical luminescence sensor (LDO).Low maintenance, easy calibration, no polarisation time, no Oxygen consumption and no different gases interference are the big advantage of this new technology.Optical luminescence sensor (LDO) is maintenance free. No electrolyte inside at membrane cap.

Models

Oxy 7 Vio with polarographic sensor DO7 cable 3 mt

Professional portable oximeter with innovative high resolution color display for excellent data visualization in all lighting conditions thanks also to the possibility of automatically and manually adjusting the contrast and illumination of the display.
Dissolved oxygen measurement, saturation% and barometric pressure with temperature display.
The online guide in setup and calibration allows a simple and immediate use of the device.
Automatic calibration up to two points (0% - 100%).
Automatic compensation of temperature and barometric pressure, manual salinity.
Automatic sensor polarization timer.
Measurement stability indicator and possibility to select 3 stability levels.
All operations are constantly monitored and reported to the operator via the colored LED above the display and self-diagnosis messages.

Measuring range:
DO: 0.0 ... 50 mg / l (0.01 / 0.1 mg / l)
Saturation: 0.0 ... 400% (0.1 / 1%)
Barometric pressure: 0 ... 1100 mbar (1 bar)
Temperature: 0 ... +100.0 ° C

Complete with DO7 / 3MT polarographic sensor with built-in temperature sensor and 3 meter cable, 2 replacement membranes, filling solution (30 ml), zero oxygen standard, instructions for use and carrying case.

Oxy 70 Vio portable oximeter with optical sensor LDO cable 2 mt

Professional portable oximeter with innovative high resolution color display for excellent data visualization in all lighting conditions thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display.
Dissolved oxygen measurement, saturation% and barometric pressure with temperature display.
The online guide in setup and calibration allows a simple and immediate use of the device.
Automatic calibration up to two points (0% - 100%).
Automatic compensation of temperature and barometric pressure, manual salinity.
GLP functions: Date and time, display of calibration data and setting of calibration deadline.
Manual and automatic datalogger with the possibility of downloading data to PC via micro USB.
Data Link software freely downloadable from www.giorgiobormac.com.
Measurement stability indicator and possibility to select 3 stability levels.
All operations are constantly monitored and signaled to the operator via the colored LED above the display and self-diagnosis messages.

The maintenance-free optical sensor exists in two variants:
cable length 2 meters or cable length 10 meters.

Measuring range:
DO: 0.0 ... 50 mg / l (0.01 / 0.1 mg / l)
Saturation: 0.0 ... 400% (0.1 / 1%)
Barometric pressure: 0 ... 1100 mbar
Temperature: -10 ... +110.0 ° C

Supplied as standard:
Optical sensor, zero oxygen standard, AC adapter, USB cable, instructions for use and carrying case.

Complete with OXY LDO70 Oxygen optical sensor with built-in temperature sensor 2 meters long cable.

Oxy 70 Vio portable oximeter with optical sensor 10 mt cable

Professional portable oximeter with innovative high resolution color display for excellent data visualization in all lighting conditions thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display.
Dissolved oxygen measurement, saturation% and barometric pressure with temperature display.
The online guide in setup and calibration allows a simple and immediate use of the device.
Automatic calibration up to two points (0% - 100%).
Automatic compensation of temperature and barometric pressure, manual salinity.
GLP functions: Date and time, display of calibration data and setting of calibration deadline.
Manual and automatic datalogger with the possibility of downloading data to PC via micro USB.
Data Link software freely downloadable from www.giorgiobormac.com.
Measurement stability indicator and possibility to select 3 stability levels.
All operations are constantly monitored and signaled to the operator via the colored LED above the display and self-diagnosis messages.

The maintenance-free optical sensor exists in two variants:
cable length 2 meters or cable length 10 meters.

Measuring range:
DO: 0.0 ... 50 mg / l (0.01 / 0.1 mg / l)
Saturation: 0.0 ... 400% (0.1 / 1%)
Barometric pressure: 0 ... 1100 mbar
Temperature: -10 ... +110.0 ° C

Supplied as standard:
Optical sensor, zero oxygen standard, AC adapter, USB cable, instructions for use and carrying case.

Complete with OXY LDO70 Oxygen optical sensor with built-in temperature sensor 10 meters long cable.

Accessories

Polarographic sensor D07/3MT, 2 membrane, filling solution

2 membranes for OXY DO7 / 3MT sensor Replacement Kit

1X30 ml filling solution for OXY DO7 / 3MT electrode

Standard 0 disposable oxygen Kit 5 bottles for DO7 / 3MT, LDO70 / 2MT, LDO70 / 10MT

Armour in PPE for sensor DO7/3MT

Standard 0 single-use oxygen for DO7 / 3MT, LDO70 / 2MT, LDO70 / 10MT

Optical sensor LDO70/2MT only for Oxy 70

Optical sensor LDO70/10MT only for Oxy 70

LDO membrane for LDO70 / 2MT and LDO70 / 10MT sensor

Armour in steel for dip immersion only for LDO70, 3 and 10 mt