Portable

The future starts now with these models of portable Multiparameters.

An elegant and ergonomic case, with practical soft rubber and IP57 protection, contains the best of technology. A large display ( backlight for PC 70 ) shows all the informations that you need about measurement, sensor life and instrument’s memory. 
Only 4 keys ( 6 for PC 70 ) allow the user to control all functions in an intuitive and easy way. 
In only one instrument you have pH / mV / Conductivity / TDS / SALT ( depending on the model if PC 7 or PC 70 )

Models

PC 7 Vio multiparameter with 201T Electrode and 2301T Cell

Professional portable multiparameter with innovative high resolution color display, for excellent data visualization in all lighting conditions, thanks also to the possibility of automatically and manually adjusting the contrast and illumination of the display.
Measurement of pH, mV, ORP, Conductivity, TDS, with temperature display and the possibility to select the parameters you want to view.
The online guide in setup and calibration allows a simple and immediate use of the device.
Automatic pH calibration with USA and NIST buffers up to 3 points and 2 points defined by the user.
Automatic ORP calibration 1 point.
Automatic calibration of conductivity up to 5 points and 1 point defined by the user.
Adjustable reference temperature and selectable cell constant.
Indication with icons of the calibrated points.
Measurement stability indicator and possibility to select 3 stability levels.
All operations are constantly monitored and signaled to the operator via the colored LED above the display and the self-diagnosis messages.

Measuring range:
pH: 0.00 ... 14.00 (0.01 pH)
mV: –1000… + 1000 (0.1 mV)
Cond: 0.01 µS ... 200 mS (0.01 µS - automatic)
TDS: 0.01 mg / l ... 200 g / l
Temperature: 0 ... 100.0 ° C (0.1 ° C)

Supplied as standard:
Field support with 3 holes for electrodes, colored buffer solutions,
instructions for use and carrying case.

With 201T electrode and 2301T cell, both with built-in temperature sensor and 1 m fixed cable.

PC 7 Vio multiparameter with 2301T Cell without electrode

Professional portable multiparameter with innovative high resolution color display, for excellent data visualization in all lighting conditions, thanks also to the possibility of automatically and manually adjusting the contrast and illumination of the display.
Measurement of pH, mV, ORP, Conductivity, TDS, with temperature display and the possibility to select the parameters you want to view.
The online guide in setup and calibration allows a simple and immediate use of the device.
Automatic pH calibration with USA and NIST buffers up to 3 points and 2 points defined by the user.
Automatic ORP calibration 1 point.
Automatic calibration of conductivity up to 5 points and 1 point defined by the user.
Adjustable reference temperature and selectable cell constant.
Indication with icons of the calibrated points.
Measurement stability indicator and possibility to select 3 stability levels.
All operations are constantly monitored and signaled to the operator via the colored LED above the display and the self-diagnosis messages.

Measuring range:
pH: 0.00 ... 14.00 (0.01 pH)
mV: –1000… + 1000 (0.1 mV)
Cond: 0.01 µS ... 200 mS (0.01 µS - automatic)
TDS: 0.01 mg / l ... 200 g / l
Temperature: 0 ... 100.0 ° C (0.1 ° C)

Supplied as standard:
Field support with 3 holes for electrodes, colored buffer solutions,
instructions for use and carrying case.

Without electrode.
With 2301T cell
, NT 55 temperature probe, S7-BNC cable and accessories. 

PC 7 Vio multiparameter without sensors

Professional portable multiparameter with innovative high resolution color display, for excellent data visualization in all lighting conditions, thanks also to the possibility of automatically and manually adjusting the contrast and illumination of the display.
Measurement of pH, mV, ORP, Conductivity, TDS, with temperature display and the possibility to select the parameters you want to view.
The online guide in setup and calibration allows a simple and immediate use of the device.
Automatic pH calibration with USA and NIST buffers up to 3 points and 2 points defined by the user.
Automatic ORP calibration 1 point.
Automatic calibration of conductivity up to 5 points and 1 point defined by the user.
Adjustable reference temperature and selectable cell constant.
Indication with icons of the calibrated points.
Measurement stability indicator and possibility to select 3 stability levels.
All operations are constantly monitored and signaled to the operator via the colored LED above the display and the self-diagnosis messages.

Measuring range:
pH: 0.00 ... 14.00 (0.01 pH)
mV: –1000… + 1000 (0.1 mV)
Cond: 0.01 µS ... 200 mS (0.01 µS - automatic)
TDS: 0.01 mg / l ... 200 g / l
Temperature: 0 ... 100.0 ° C (0.1 ° C)

Supplied as standard:
Field support with 3 holes for electrodes, colored buffer solutions,
instructions for use and carrying case.

Without pH electrode and conductivity cell; with NT 55 temperature probe, S7-BNC cable and accessories. 

PC 7 Vio portable multiparameter with 201T DHS electrode and 2301T cell

Professional portable multiparameter with innovative high resolution color display, for excellent data visualization in all lighting conditions, thanks also to the possibility of automatically and manually adjusting the contrast and illumination of the display.
Measurement of pH, mV, ORP, Conductivity, TDS, with temperature display and the possibility to select the parameters you want to view.
The online guide in setup and calibration allows a simple and immediate use of the device.
Automatic pH calibration with USA and NIST buffers up to 3 points and 2 points defined by the user.
Automatic ORP calibration 1 point.
Automatic calibration of conductivity up to 5 points and 1 point defined by the user.
Adjustable reference temperature and selectable cell constant.
Indication with icons of the calibrated points.
Measurement stability indicator and possibility to select 3 stability levels.
All operations are constantly monitored and signaled to the operator via the colored LED above the display and the self-diagnosis messages.

Measuring range:
pH: 0.00 ... 14.00 (0.01 pH)
mV: –1000… + 1000 (0.1 mV)
Cond: 0.01 µS ... 200 mS (0.01 µS - automatic)
TDS: 0.01 mg / l ... 200 g / l
Temperature: 0 ... 100.0 ° C (0.1 ° C)

Supplied as standard:
Field support with 3 holes for electrodes, colored buffer solutions,
instructions for use and carrying case.

With 201T DHS digital electrode and 2301T cell, both with built-in temperature sensor and 1 m fixed cable.

PC 70 Vio Complete with 201T Electrode and 2301T Cell

Professional portable multiparameter with triple power supply (battery, PC, mains) with innovative high resolution color display, for excellent data visualization in all cooling conditions, also thanks to the possibility of automatically and manually adjusting control and lighting of the screen.
Measurement of pH, mV, ORP, Conductivity, TDS, Salinity with temperature display and possibility to select the parameters you want to view.
The online guide in setup and calibration allows a simple and immediate use of the device.
Automatic pH calibration with USA and NIST buffers up to 3 points and 2 points defined by the user.
Automatic ORP calibration 1 point.
Automatic calibration of conductivity up to 5 points and a user-defined point.
Indication with icons of the calibrated points.
Measurement stability indicator and possibility to select 3 stability levels.
GLP functions: Date and time, display of calibration data and calibration notification.
Manual and automatic Data Logger with the possibility of downloading data to PC via micro USB.
Data-Link software freely downloadable from www.giorgiobormac.com.
All operations are constantly monitored and signaled to the operator via the colored LED above the display and the self-diagnosis messages.

Measuring range:
pH: -2.00 ... 16.00 (0.01 pH)
mV: -1000 ... + 1999 (0.1 mV)
Cond: 0.0 µS ... 200 mS (0.01 µS - automatic)
Salinity: 0.1 ppm ... 100 ppt
TDS: 0.01 mg / l ... 200 g / l
Temperature: -10 ... + 110.0 ° C (0.1 ° C)

Supplied as standard:
Field support with 3 holes for electrodes, colored buffer solutions, USB cable, power supply, instructions for use and carrying case.

With 201T electrode and 2301T cell, both with built-in temperature sensor and 1 m fixed cable.

PC 70 Vio with 2301T Cell without electrode

Professional portable multiparameter with triple power supply (battery, PC, mains) with innovative high resolution color display, for excellent data visualization in all cooling conditions, also thanks to the possibility of automatically and manually adjusting control and lighting of the screen.
Measurement of pH, mV, ORP, Conductivity, TDS, Salinity with temperature display and possibility to select the parameters you want to view.
The online guide in setup and calibration allows a simple and immediate use of the device.
Automatic pH calibration with USA and NIST buffers up to 3 points and 2 points defined by the user.
Automatic ORP calibration 1 point.
Automatic calibration of conductivity up to 5 points and a user-defined point.
Indication with icons of the calibrated points.
Measurement stability indicator and possibility to select 3 stability levels.
GLP functions: Date and time, display of calibration data and calibration notification.
Manual and automatic Data Logger with the possibility of downloading data to PC via micro USB.
Data-Link software freely downloadable from www.giorgiobormac.com.
All operations are constantly monitored and signaled to the operator via the colored LED above the display and the self-diagnosis messages.

Measuring range:
pH: -2.00 ... 16.00 (0.01 pH)
mV: -1000 ... + 1999 (0.1 mV)
Cond: 0.0 µS ... 200 mS (0.01 µS - automatic)
Salinity: 0.1 ppm ... 100 ppt
TDS: 0.01 mg / l ... 200 g / l
Temperature: -10 ... + 110.0 ° C (0.1 ° C)

Supplied as standard:
Field support with 3 holes for electrodes, colored buffer solutions, USB cable, power supply, instructions for use and carrying case.

Without electrode.
With 2301T cell, NT 55 temperature probe, S7-BNC cable and accessories. 

PC 70 Vio without electrode and without electrode

Professional portable multiparameter with triple power supply (battery, PC, mains) with innovative high resolution color display, for excellent data visualization in all cooling conditions, also thanks to the possibility of automatically and manually adjusting control and lighting of the screen.
Measurement of pH, mV, ORP, Conductivity, TDS, Salinity with temperature display and possibility to select the parameters you want to view.
The online guide in setup and calibration allows a simple and immediate use of the device.
Automatic pH calibration with USA and NIST buffers up to 3 points and 2 points defined by the user.
Automatic ORP calibration 1 point.
Automatic calibration of conductivity up to 5 points and a user-defined point.
Indication with icons of the calibrated points.
Measurement stability indicator and possibility to select 3 stability levels.
GLP functions: Date and time, display of calibration data and calibration notification.
Manual and automatic Data Logger with the possibility of downloading data to PC via micro USB.
Data-Link software freely downloadable from www.giorgiobormac.com.
All operations are constantly monitored and signaled to the operator via the colored LED above the display and the self-diagnosis messages.

Measuring range:
pH: -2.00 ... 16.00 (0.01 pH)
mV: -1000 ... + 1999 (0.1 mV)
Cond: 0.0 µS ... 200 mS (0.01 µS - automatic)
Salinity: 0.1 ppm ... 100 ppt
TDS: 0.01 mg / l ... 200 g / l
Temperature: -10 ... + 110.0 ° C (0.1 ° C)

Supplied as standard:
Field support with 3 holes for electrodes, colored buffer solutions, USB cable, power supply, instructions for use and carrying case.

Without electrode and without 2301T cell; with NT 55 temperature probe, S7-BNC cable and accessories. 

PC 70 Vio Complete with 201T DHS Electrode and 2301T Cell

Professional portable multiparameter with triple power supply (battery, PC, mains) with innovative high resolution color display, for excellent data visualization in all cooling conditions, also thanks to the possibility of automatically and manually adjusting control and lighting of the screen.
Measurement of pH, mV, ORP, Conductivity, TDS, Salinity with temperature display and possibility to select the parameters you want to view.
The online guide in setup and calibration allows a simple and immediate use of the device.
Automatic pH calibration with USA and NIST buffers up to 3 points and 2 points defined by the user.
Automatic ORP calibration 1 point.
Automatic calibration of conductivity up to 5 points and a user-defined point.
Indication with icons of the calibrated points.
Measurement stability indicator and possibility to select 3 stability levels.
GLP functions: Date and time, display of calibration data and calibration notification.
Manual and automatic Data Logger with the possibility of downloading data to PC via micro USB.
Data-Link software freely downloadable from www.giorgiobormac.com.
All operations are constantly monitored and signaled to the operator via the colored LED above the display and the self-diagnosis messages.

Measuring range:
pH: -2.00 ... 16.00 (0.01 pH)
mV: -1000 ... + 1999 (0.1 mV)
Cond: 0.0 µS ... 200 mS (0.01 µS - automatic)
Salinity: 0.1 ppm ... 100 ppt
TDS: 0.01 mg / l ... 200 g / l
Temperature: -10 ... + 110.0 ° C (0.1 ° C)

Supplied as standard:
Field support with 3 holes for electrodes, colored buffer solutions, USB cable, power supply, instructions for use and carrying case.

With 201T DHS electrode and 2301T cell, both with built-in temperature sensor and 1 m fixed cable.

XS Revio Multiparameter - 201 T Electrode, 2301T Cell, polarographic DO Sensor

Professional portable multiparameter with triple power supply (battery, PC, mains) with backlit color graphic display, for excellent data visualization in all lighting conditions, thanks also to the possibility of automatically and manually adjusting the contrast and lighting of the display.
Measurement of pH, mV, ORP, ISE, Conductivity, TDS, Salinity, Resistivity, Dissolved Oxygen and Temperature.
The online help in setup and calibration allows a simple and immediate use of the device.
Simultaneous display of multiple parameters, chosen by the operator.
Automatic pH calibration with USA and NIST buffers up to 5 points and 5 points defined by the user.
Automatic ORP calibration 1 point.
Automatic calibration of conductivity up to 4 points and 1 point defined by the user.
Adjustable reference temperature and selectable cell constant.
Automatic O2 calibration up to two points (0% - 100%).
Indication with icons of the calibrated points.
GLP functions: Date and time, display of calibration data and setting of calibration deadline.
Manual and automatic data logger with the possibility of downloading data to PC via micro USB.
Data Link software freely downloadable from www.giorgiobormac.com.
Measurement stability indicator and possibility to select 3 stability levels.
All operations are constantly monitored and signaled to the operator via the colored LED above the display and self-diagnosis messages.

With 201 T electrode2301T cell and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in rigid case.



Measuring range:
pH: -2.000 ... 20.000 (0.001 pH)
mV: –2000… + 2000 (0.1 mV)
ISE: 0.001 ... 19999 ppm
Cond: 0.0 µS ... 1000 mS (0.1 µS - automatic)
Resistivity: 1 Ω ... 20 MΩ
Salinity: 0.1 ppm ... 100 ppt
TDS: 0.1 mg / l ... 500.0 g / l
DO: 0.0 ... 50 mg / l (0.01 / 0.1 mg / l)
Saturation: 0.0… 400% (0.1 / 1%)
Barometric pressure: 0… 1100 mbar (1 mbar)
Temperature: -30 ... 130.0 ° C (0.1 ° C)

XS Revio Multiparameter - 201 T Electrode, polarographic DO Sensor 

Professional portable multiparameter with triple power supply (battery, PC, mains) with backlit color graphic display, for excellent data visualization in all lighting conditions, thanks also to the possibility of automatically and manually adjusting the contrast and lighting of the display.
Measurement of pH, mV, ORP, ISE, Conductivity, TDS, Salinity, Resistivity, Dissolved Oxygen and Temperature.
The online help in setup and calibration allows a simple and immediate use of the device.
Simultaneous display of multiple parameters, chosen by the operator.
Automatic pH calibration with USA and NIST buffers up to 5 points and 5 points defined by the user.
Automatic ORP calibration 1 point.
Automatic calibration of conductivity up to 4 points and 1 point defined by the user.
Adjustable reference temperature and selectable cell constant.
Automatic O2 calibration up to two points (0% - 100%).
Indication with icons of the calibrated points.
GLP functions: Date and time, display of calibration data and setting of calibration deadline.
Manual and automatic data logger with the possibility of downloading data to PC via micro USB.
Data Link software freely downloadable from www.giorgiobormac.com.
Measurement stability indicator and possibility to select 3 stability levels.
All operations are constantly monitored and signaled to the operator via the colored LED above the display and self-diagnosis messages.

With 201 T electrode and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in rigid case.



Measuring range:
pH: -2.000 ... 20.000 (0.001 pH)
mV: –2000… + 2000 (0.1 mV)
ISE: 0.001 ... 19999 ppm
Cond: 0.0 µS ... 1000 mS (0.1 µS - automatic)
Resistivity: 1 Ω ... 20 MΩ
Salinity: 0.1 ppm ... 100 ppt
TDS: 0.1 mg / l ... 500.0 g / l
DO: 0.0 ... 50 mg / l (0.01 / 0.1 mg / l)
Saturation: 0.0… 400% (0.1 / 1%)
Barometric pressure: 0… 1100 mbar (1 mbar)
Temperature: -30 ... 130.0 ° C (0.1 ° C)

XS Revio Multiparameter - Only instrument with accessories

Professional portable multiparameter with triple power supply (battery, PC, mains) with backlit color graphic display, for excellent data visualization in all lighting conditions, thanks also to the possibility of automatically and manually adjusting the contrast and lighting of the display.
Measurement of pH, mV, ORP, ISE, Conductivity, TDS, Salinity, Resistivity, Dissolved Oxygen and Temperature.
The online help in setup and calibration allows a simple and immediate use of the device.
Simultaneous display of multiple parameters, chosen by the operator.
Automatic pH calibration with USA and NIST buffers up to 5 points and 5 points defined by the user.
Automatic ORP calibration 1 point.
Automatic calibration of conductivity up to 4 points and 1 point defined by the user.
Adjustable reference temperature and selectable cell constant.
Automatic O2 calibration up to two points (0% - 100%).
Indication with icons of the calibrated points.
GLP functions: Date and time, display of calibration data and setting of calibration deadline.
Manual and automatic data logger with the possibility of downloading data to PC via micro USB.
Data Link software freely downloadable from www.giorgiobormac.com.
Measurement stability indicator and possibility to select 3 stability levels.
All operations are constantly monitored and signaled to the operator via the colored LED above the display and self-diagnosis messages.

Instrument in rigid case, with NT 55 temperature probe 3 meter cable, S7-BNC cable and accessories. WITHOUT SENSORS.



Measuring range:
pH: -2.000 ... 20.000 (0.001 pH)
mV: –2000… + 2000 (0.1 mV)
ISE: 0.001 ... 19999 ppm
Cond: 0.0 µS ... 1000 mS (0.1 µS - automatic)
Resistivity: 1 Ω ... 20 MΩ
Salinity: 0.1 ppm ... 100 ppt
TDS: 0.1 mg / l ... 500.0 g / l
DO: 0.0 ... 50 mg / l (0.01 / 0.1 mg / l)
Saturation: 0.0… 400% (0.1 / 1%)
Barometric pressure: 0… 1100 mbar (1 mbar)
Temperature: -30 ... 130.0 ° C (0.1 ° C)

XS Revio Multiparameter - 2301T Cell, polarographic DO Sensor

Professional portable multiparameter with triple power supply (battery, PC, mains) with backlit color graphic display, for excellent data visualization in all lighting conditions, thanks also to the possibility of automatically and manually adjusting the contrast and lighting of the display.
Measurement of pH, mV, ORP, ISE, Conductivity, TDS, Salinity, Resistivity, Dissolved Oxygen and Temperature.
The online help in setup and calibration allows a simple and immediate use of the device.
Simultaneous display of multiple parameters, chosen by the operator.
Automatic pH calibration with USA and NIST buffers up to 5 points and 5 points defined by the user.
Automatic ORP calibration 1 point.
Automatic calibration of conductivity up to 4 points and 1 point defined by the user.
Adjustable reference temperature and selectable cell constant.
Automatic O2 calibration up to two points (0% - 100%).
Indication with icons of the calibrated points.
GLP functions: Date and time, display of calibration data and setting of calibration deadline.
Manual and automatic data logger with the possibility of downloading data to PC via micro USB.
Data Link software freely downloadable from www.giorgiobormac.com.
Measurement stability indicator and possibility to select 3 stability levels.
All operations are constantly monitored and signaled to the operator via the colored LED above the display and self-diagnosis messages.

With 2301T cell and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in rigid case.



Measuring range:
pH: -2.000 ... 20.000 (0.001 pH)
mV: –2000… + 2000 (0.1 mV)
ISE: 0.001 ... 19999 ppm
Cond: 0.0 µS ... 1000 mS (0.1 µS - automatic)
Resistivity: 1 Ω ... 20 MΩ
Salinity: 0.1 ppm ... 100 ppt
TDS: 0.1 mg / l ... 500.0 g / l
DO: 0.0 ... 50 mg / l (0.01 / 0.1 mg / l)
Saturation: 0.0… 400% (0.1 / 1%)
Barometric pressure: 0… 1100 mbar (1 mbar)
Temperature: -30 ... 130.0 ° C (0.1 ° C)

XS Revio Multiparameter - 201 T DHS Electrode, 2301T Cell, Polarographic DO Sensor

Professional portable multiparameter with triple power supply (battery, PC, mains) with backlit color graphic display, for excellent data visualization in all lighting conditions, thanks also to the possibility of automatically and manually adjusting the contrast and lighting of the display.
Measurement of pH, mV, ORP, ISE, Conductivity, TDS, Salinity, Resistivity, Dissolved Oxygen and Temperature.
The online help in setup and calibration allows a simple and immediate use of the device.
Simultaneous display of multiple parameters, chosen by the operator.
Automatic pH calibration with USA and NIST buffers up to 5 points and 5 points defined by the user.
Automatic ORP calibration 1 point.
Automatic calibration of conductivity up to 4 points and 1 point defined by the user.
Adjustable reference temperature and selectable cell constant.
Automatic O2 calibration up to two points (0% - 100%).
Indication with icons of the calibrated points.
GLP functions: Date and time, display of calibration data and setting of calibration deadline.
Manual and automatic data logger with the possibility of downloading data to PC via micro USB.
Data Link software freely downloadable from www.giorgiobormac.com.
Measurement stability indicator and possibility to select 3 stability levels.
All operations are constantly monitored and signaled to the operator via the colored LED above the display and self-diagnosis messages.

With 201 T DHS digital electrode, 2301T cell and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in rigid case.



Measuring range:
pH: -2.000 ... 20.000 (0.001 pH)
mV: –2000… + 2000 (0.1 mV)
ISE: 0.001 ... 19999 ppm
Cond: 0.0 µS ... 1000 mS (0.1 µS - automatic)
Resistivity: 1 Ω ... 20 MΩ
Salinity: 0.1 ppm ... 100 ppt
TDS: 0.1 mg / l ... 500.0 g / l
DO: 0.0 ... 50 mg / l (0.01 / 0.1 mg / l)
Saturation: 0.0… 400% (0.1 / 1%)
Barometric pressure: 0… 1100 mbar (1 mbar)
Temperature: -30 ... 130.0 ° C (0.1 ° C)

XS Revio Multiparameter - 201 T Electrode, 2301T Cell, polarographic DO Sensor _ SOFT CASE

Professional portable multiparameter with triple power supply (battery, PC, mains) with backlit color graphic display, for excellent data visualization in all lighting conditions, thanks also to the possibility of automatically and manually adjusting the contrast and lighting of the display.
Measurement of pH, mV, ORP, ISE, Conductivity, TDS, Salinity, Resistivity, Dissolved Oxygen and Temperature.
The online help in setup and calibration allows a simple and immediate use of the device.
Simultaneous display of multiple parameters, chosen by the operator.
Automatic pH calibration with USA and NIST buffers up to 5 points and 5 points defined by the user.
Automatic ORP calibration 1 point.
Automatic calibration of conductivity up to 4 points and 1 point defined by the user.
Adjustable reference temperature and selectable cell constant.
Automatic O2 calibration up to two points (0% - 100%).
Indication with icons of the calibrated points.
GLP functions: Date and time, display of calibration data and setting of calibration deadline.
Manual and automatic data logger with the possibility of downloading data to PC via micro USB.
Data Link software freely downloadable from www.giorgiobormac.com.
Measurement stability indicator and possibility to select 3 stability levels.
All operations are constantly monitored and signaled to the operator via the colored LED above the display and self-diagnosis messages.

With 201 T DHS digital electrode2301T cell and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in PURSE WITH SHOULDER STRAP.



Measuring range:
pH: -2.000 ... 20.000 (0.001 pH)
mV: –2000… + 2000 (0.1 mV)
ISE: 0.001 ... 19999 ppm
Cond: 0.0 µS ... 1000 mS (0.1 µS - automatic)
Resistivity: 1 Ω ... 20 MΩ
Salinity: 0.1 ppm ... 100 ppt
TDS: 0.1 mg / l ... 500.0 g / l
DO: 0.0 ... 50 mg / l (0.01 / 0.1 mg / l)
Saturation: 0.0… 400% (0.1 / 1%)
Barometric pressure: 0… 1100 mbar (1 mbar)
Temperature: -30 ... 130.0 ° C (0.1 ° C)

Accessories

No Articles