Benchmeter

XS instrument introduce a complete new line of bench instruments bringing together innovative ideas in pH and conductivity measurement and an intuitive usage.
With the experience of portable line, born the new 8-80 bench instrument line.

Easy is the rule of this new line :

Easy to read

Easy to learn

Easy to calibrate

Models

PC 52+ DHS WITH Cell 2301T and 201T DHS electrode

PC 52+ DHS

Digital benchtop multiparameter with microprocessor, with backlit display for pH, COND, mV and Temperature. Manual or automatic temperature compensation. Display of the buffer values ​​used for calibration. In pH / mV mode: "Stability" function and setting of the measurement stability criteria (Low-Med-High) Automatic calibration up to 3 points NIST, USA selectable buffer (8 values) and 2 user-defined values. In COND mode: automatic scale change, adjustable reference temperature (15 ... 30 ° C) and cell constant (C = 0.1; 1; 10) selectable Automatic and manual calibration with automatic recognition of 4 standards (84; 1413 μS and 12.88; 111 mS) and 1 user-defined value Self-diagnosis messages. 3-year warranty on the electronic part.

Measurement range: pH 0.00 ... 14.00 (0.1-0.01 pH); mV ± 1000 (1 mV); COND (with cell C = 1) 0.0 ... 199.9 mS; TDS: 0 ... 100 g / l; °C 0.0 ... 100.0 (0.1 ° C).

Complete with 201 T DHS digital electrode with built-in temperature sensor, 2301T 2-electrode cell with built-in temperature sensor, both with 1m fixed cable, BNC plug and Cinch / RCA connector for temperature sensor, electrode holder, pads colored, power supply and instructions for use.

PC 52+ DHS WITH Cell 2301T and Electrode 201T

PC 52+ DHS

digital benchtop multiparameter instrument with microprocessor, backlight display for pH, COND, mV and Temperature measurements. Self-compensation of the temperature. Displaying the values of the buffer solution used for calibration. In pH / mV mode: "Stability" function of the measurement, settable in three levels Low-Med-High. Automatic calibration up to 3 points. Buffer selectable NIST, USA (8 values) and 2 values defined by the user. In COND mode: Automatic scale change. Reference temperature (15 ... 30 °C) and cell constant (C= 0,1; 1; 10) selectable. Automatic and manual calibration with recognition of 4 conductivity standards (84; 1413 µS, 12,88 and 111 mS) from 1 to 4 points with calculation of the different cell constants and 1 standard defined by user. Self-diagnosis messages, 3 years warranty on electronic parts. 

Measuring: pH 0,00...14,00 (0,1-0,01 pH); mV ± 1000 (1 mV); COND (con cella C=1) 0,0...199,9 mS; TDS: 0...100 g/l; °C 0,0...100,0 (0,1 °C). 

Complete of electrode 201 T temperature probe integrated, 2301 T cell with temperature probe integrated, both with a 1 mt length cable, BNC and Cinch/RCA connector, support holder, coloured buffers solutions and power supply.

PC 52+ DHS WITH 2301 T Cell, WITHOUT electrode

PC 52+ DHS

digital benchtop multiparameter instrument with microprocessor, backlight display for pH, COND, mV and Temperature measurements. Self-compensation of the temperature. Displaying the values of the buffer solution used for calibration. In pH / mV mode: "Stability" function of the measurement, settable in three levels Low-Med-High. Automatic calibration up to 3 points. Buffer selectable NIST, USA (8 values) and 2 values defined by the user. In COND mode: Automatic scale change. Reference temperature (15 ... 30 °C) and cell constant (C= 0,1; 1; 10) selectable. Automatic and manual calibration with recognition of 4 conductivity standards (84; 1413 µS, 12,88 and 111 mS) from 1 to 4 points with calculation of the different cell constants and 1 standard defined by user. Self-diagnosis messages, 3 years warranty on electronic parts. 

MeasuringpH 0,00...14,00 (0,1-0,01 pH); mV ± 1000 (1 mV); COND (con cella C=1) 0,0...199,9 mS; TDS: 0...100 g/l; °C 0,0...100,0 (0,1 °C). 

Complete of 2301T conductivity cell with temperature probe integrated, 1 mt length cable, support holder, coloured buffers solutions and power supply.

PC 52+ DHS WITH 201 T electrode, WITHOUT cell

PC 52+ DHS

digital benchtop multiparameter instrument with microprocessor, backlight display for pH, COND, mV and Temperature measurements. Self-compensation of the temperature. Displaying the values of the buffer solution used for calibration. In pH / mV mode: "Stability" function of the measurement, settable in three levels Low-Med-High. Automatic calibration up to 3 points. Buffer selectable NIST, USA (8 values) and 2 values defined by the user. In COND mode: Automatic scale change. Reference temperature (15 ... 30 °C) and cell constant (C= 0,1; 1; 10) selectable. Automatic and manual calibration with recognition of 4 conductivity standards (84; 1413 µS, 12,88 and 111 mS) from 1 to 4 points with calculation of the different cell constants and 1 standard defined by user. Self-diagnosis messages, 3 years warranty on electronic parts. 

MeasuringpH 0,00...14,00 (0,1-0,01 pH); mV ± 1000 (1 mV); COND (con cella C=1) 0,0...199,9 mS; TDS: 0...100 g/l; °C 0,0...100,0 (0,1 °C). 

Complete of electrode 201T  with temperature probe integrated, 1 mt length cable, support holder, coloured buffers solutions and power supply.

PC 52+ DHS WITHOUT electrode and conductivity cell

PC 52+ DHS

digital benchtop multiparameter instrument with microprocessor, backlight display for pH, COND, mV and Temperature measurements. Self-compensation of the temperature. Displaying the values of the buffer solution used for calibration. In pH / mV mode: "Stability" function of the measurement, settable in three levels Low-Med-High. Automatic calibration up to 3 points. Buffer selectable NIST, USA (8 values) and 2 values defined by the user. In COND mode: Automatic scale change. Reference temperature (15 ... 30 °C) and cell constant (C= 0,1; 1; 10) selectable. Automatic and manual calibration with recognition of 4 conductivity standards (84; 1413µS, 12,88 and 111 mS) from 1 to 4 points with calculation of the different cell constants and 1 standard defined by user. Self-diagnosis messages, 3 years warranty on electronic parts. 

MeasuringpH 0,00...14,00 (0,1-0,01 pH); mV ± 1000 (1 mV); COND (con cella C=1) 0,0...199,9 mS; TDS: 0...100 g/l; °C 0,0...100,0 (0,1 °C). 

Included with NT55 temperature probe, S7/BNC cable, support holder, coloured buffers solutions and power supply.

PC 62 DHS COMPLETE with 201T DHS Electrode and 2301T cell

PC 62 DHS

Digital benchtop multiparameter with microprocessor for pH, COND/TDS/Salinity, mV and Temperature. Manual or automatic temperature compensation with NT 55 probe. Large 3-color backlit display with display of the buffer values ​​used for calibration. In the pH / mV mode: "Stability" function and setting of the measurement stability criteria (Low-Med-High) Automatic calibration up to 3 points NIST, USA selectable buffer (8 values) and 2 user-defined values. In COND / TDS mode: automatic scale change, adjustable reference temperature (15 ... 30 ° C) and cell constant (C = 0.1; 1; 10) selectable Automatic and manual calibration with automatic recognition of 4 standards (84 ; 1413 μS and 12.88; 111 mS) and 1 user-defined value GLP with date and time of the last calibration "CAL TIMER" function for setting the recalibration frequency Manual or automatic data logger with memory / recall up to 500 data with date and time. Self-diagnosis messages, 3-year warranty on the electronic part.

Measurement range: pH -2.00 ... 16.00 (0.1-0.01 pH); mV -199.9 ... + 199.9 /-1000...+1999 (0.1 / 1 mV); COND (with cell C = 1) 0.0 ... 199.9 mS; TDS: 0 ... 100 g / l; Salinity: 0 ... 50 g / l; °C -10.0 ... + 110.0 (0.1 ° C).

Complete with 201 T DHS electrode with built-in temperature sensor, 2-electrode 2301T cell with built-in temperature sensor, both with 1 m fixed cable, BNC plug and Cinch connector for temperature sensor, 3-hole electrode holder for electrodes , with USB output for PC connection. 220V power supply, PC-Link software with USB cable for downloading data to the PC, colored pads and instructions for use.


PC 62 DHS COMPLETE with 201T +ATC and CELL

PC 62 DHS

digital benchtop multiparameter instrument with microprocessor for pH, COND, mV and Temperature measurements. Self-compensation of the temperature with NT 55 probe. Large backlight display with 3 colours, displaying the values of buffer solutions used for calibration. In pH / mV mode: "Stability" function of the measurement, settable in three levels Low-Med-High. Automatic calibration up to 3 points. Buffer selectable NIST, USA (8 values) and 2 values defined by the user. In COND/TDS mode: Automatic scale change. Reference temperature (15 ... 30 °C) and cell constant (C= 0,1; 1; 10) selectable. Automatic and manual calibration with recognition of 4 conductivity standards (84; 1413 µS, 12,88 and 111 mS)  and 1 standard defined by user. GLP function with date and hour of last calibration. "CAL TIMER" function for setting the calibration frequency. Data Logger manual or automatic with memory up to 500 measurements with date and hour. Self-diagnosis messages, 3 years warranty on electronic parts. 

MeasuringpH -2,00...16,00 (0,1-0,01 pH); mV -199,9...+199,9/ -1000...+1999 (0,1/ 1 mV); COND (con cella C=1) 0,0...199,9 mS; TDS: 0...100 g/l; Salinity: 0...50 g/l; °C -10,0...+110,0 (0,1 °C). 

Complete of electrode 201 T temperature probe integrated, 2301 T cell with temperature probe integrated, both with a 1 mt length cable, BNC and Cinch/RCA connector, support holder for electrodes with 3 holes, USB door for PC. 220V power supply, PC-Link software with USB cable, colored buffers and user manual, in carry case.

PC 62 DHS benchtop meter WITH 201T WITHOUT cell

PC 62 DHS

digital benchtop multiparameter instrument with microprocessor for pHCONDmV and Temperature measurements. Self-compensation of the temperature with NT 55 probe. Large backlight display with 3 colours, displaying the values of buffer solutions used for calibration. In pH / mV mode: "Stability" function of the measurement, settable in three levels Low-Med-High. Automatic calibration up to 3 points. Buffer selectable NIST, USA (8 values) and 2 values defined by the user. In COND/TDS mode: Automatic scale change. Reference temperature (15 ... 30 °C) and cell constant (C= 0,1; 1; 10) selectable. Automatic and manual calibration with recognition of 4 conductivity standards (84; 1413 µS, 12,88 and 111 mS)  and 1 standard defined by user. GLP function with date and hour of last calibration. "CAL TIMER" function for setting the calibration frequency. Data Logger manual or automatic with memory up to 500 measurements with date and hour. Self-diagnosis messages, 3 years warranty on electronic parts. 

MeasuringpH -2,00...16,00 (0,1-0,01 pH); mV -199,9...+199,9/ -1000...+1999 (0,1/ 1 mV); COND (con cella C=1) 0,0...199,9 mS; TDS: 0...100 g/l; Salinity: 0...50 g/l; °C -10,0...+110,0 (0,1 °C). 

Complete of electrode 201 T temperature probe integrated,  but without cell, 1 mt length cable, BNC and Cinch/RCA connector, support holder for electrodes with 3 holes, USB door for PC. 220V power supply, PC-Link software with USB cable, colored buffers and user manual, in carry case

PC 62 DHS benchtop meter WITHOUT electrode WITH cell WITH NT 55

PC 62 DHS

digital benchtop multiparameter instrument with microprocessor for pHCONDmV and Temperature measurements. Self-compensation of the temperature with NT 55 probe. Large backlight display with 3 colours, displaying the values of buffer solutions used for calibration. In pH / mV mode: "Stability" function of the measurement, settable in three levels Low-Med-High. Automatic calibration up to 3 points. Buffer selectable NIST, USA (8 values) and 2 values defined by the user. In COND/TDS mode: Automatic scale change. Reference temperature (15 ... 30 C) and cell constant (C= 0,1; 1; 10) selectable. Automatic and manual calibration with recognition of 4 conductivity standards (84; 1413 µS, 12,88 and 111 mS)  and 1 standard defined by user. GLP function with date and hour of last calibration. "CAL TIMER" function for setting the calibration frequency. Data Logger manual or automatic with memory up to 500 measurements with date and hour. Self-diagnosis messages, 3 years warranty on electronic parts. 

MeasuringpH -2,00...16,00 (0,1-0,01 pH); mV -199,9...+199,9/ -1000...+1999 (0,1/ 1 mV); COND (con cella C=1) 0,0...199,9 mS; TDS: 0...100 g/l; Salinity: 0...50 g/l;  °C -10,0...+110,0 (0,1 °C). 

Without electrode but NT 55 probe, 2301T cell 2-electrode with temperature probe integratedS7/BNC cable, 1 mt length cable, BNC and Cinch/RCA connector, support holder for electrodes with 3 holes, USB door for PC. 220V power supply, PC-Link software with USB cable, colored buffers and user manual, in carry case

PC 8+ DHS STIRRER with STANDARD T-BNC DHS electrode and 2301T cell

PC 8+ DHS STIRRER

Multiparameter pH, mV, COND, TDS, Salinity, Temperature, microprocessor digital benchtop instrument, resolution ± 0.1 / 0.01 pH / 0.01 μS. Large, backlit color graphic display. Simultaneous display of pH / COND and temperature. Automatic calibration from 1 to 3 points for pH according to GLP with date and time. Selectable NIST, USA and user definable buffers (2 values). Calibration report and innovative graphic representation. Display of the buffers used for calibration on the display. Manual or automatic temperature compensation with NT 55 probe. Automatic and manual conductivity calibration with recognition of 4 standards (84; 1413 μS, 12.88 and 111 mS) from 1 to 4 points with calculation of the different cell constants and a standard defined by the 'user. Automatic scale change, automatic and manual temperature compensation (0 ... 100.0 ° C) with NT 55 probe. Reference temperature (15 ... 30 ° C), Linear temperature coefficient (0.00 ... 10.00%), Selectable cell constant (C = 0.1 - 1-10.0). Display on the display of the standards used for calibration. Manual and automatic Data Logger function. Memory / recall up to 1000 data with date / time according to GLP. Intuitive management of parameters via icons. Multilingual menu. Alarm setting and display functions in analogue format, "Latch-reading" and "Stability" with titration mode, recalibration alarm, self-diagnosis messages. USB output for PC connection and RS232 port for printer connection. Numerical password for management of calibration and cancellation of memory. Magnetic stirrer with independent control. PC software downloadable for free. IP54 keyboard, warranty on the electronic part of 3 years.

Measurement range: pH -2.00 ... 16.00 (0.01 pH); mV-2000 ... + 2000 (1 mV); COND: 0.00 μS ... 200.0 mS; Salinity: 0.01 ... 100.0 ppt; TDS: 0.1 mg / l ... 100.0 g / l; °C -10 ... 110.0 (0.1 ° C);

Complete with XS Standard T-BNC DHS digital pH electrode, S7/BNC cable, NT 55 temperature probe, 2301T epoxy conductivity cell with 2 electrodes (C=1) with built-in temperature probe, electrode holder, adjustable speed magnetic stirrer, colored pads, standard conductivity and power supply.

PC 8+ DHS STIRRER Bench with Polymer electrode and 2301T cell

PC 8+ DHS STIRRER

Multiparameter pH, mV, COND, TDS, Salinity, Temperature, microprocessor digital benchtop instrument, resolution ± 0.1 / 0.01 pH / 0.01 μS. Large, backlit color graphic display. Simultaneous display of pH / COND and temperature. Automatic calibration from 1 to 3 points for pH according to GLP with date and time. Selectable NIST, USA and user definable buffers (2 values). Calibration report and innovative graphic representation. Display of the buffers used for calibration on the display. Manual or automatic temperature compensation with NT 55 probe. Automatic and manual conductivity calibration with recognition of 4 standards (84; 1413 μS, 12.88 and 111 mS) from 1 to 4 points with calculation of the different cell constants and a standard defined by the 'user. Automatic scale change, automatic and manual temperature compensation (0 ... 100.0 ° C) with NT 55 probe. Reference temperature (15 ... 30 ° C), Linear temperature coefficient (0.00 ... 10.00%), Selectable cell constant (C = 0.1 - 1-10.0). Display on the display of the standards used for calibration. Manual and automatic Data Logger function. Memory / recall up to 1000 data with date / time according to GLP. Intuitive management of parameters via icons. Multilingual menu. Alarm setting and display functions in analogue format, "Latch-reading" and "Stability" with titration mode, recalibration alarm, self-diagnosis messages. USB output for PC connection and RS232 port for printer connection. Numerical password for management of calibration and cancellation of memory. Magnetic stirrer with independent control. PC software downloadable for free. IP54 keyboard, warranty on the electronic part of 3 years.

Measurement rangepH -2.00 ... 16.00 (0.01 pH); mV-2000 ... + 2000 (1 mV); COND: 0.00 μS ... 200.0 mS; Salinity: 0.01 ... 100.0 ppt; TDS: 0.1 mg / l ... 100.0 g / l; °C -10 ... 110.0 (0.1 ° C);

Complete with XS Polymer S7 glass electrode, S7/BNC cable, NT 55 temperature probe, 2301T conductivity cell Epoxy with 2 electrodes (C=1) with built-in temperature probe, electrode holder, adjustable speed magnetic stirrer, colored pads, standard conductivity and power supply.


PC 8+ DHS STIRRER Bench With CELL Without electrode

PC 8+ DHS STIRRER

Multiparameter pH, mV, COND, TDS, Salinity, Temperature, microprocessor digital benchtop instrument, resolution ± 0.1 / 0.01 pH / 0.01 μS. Large, backlit color graphic display. Simultaneous display of pH / COND and temperature. Automatic calibration from 1 to 3 points for pH according to GLP with date and time. Selectable NIST, USA and user definable buffers (2 values). Calibration report and innovative graphic representation. Display of the buffers used for calibration on the display. Manual or automatic temperature compensation with NT 55 probe. Automatic and manual conductivity calibration with recognition of 4 standards (84; 1413 μS, 12.88 and 111 mS) from 1 to 4 points with calculation of the different cell constants and a standard defined by the 'user. Automatic scale change, automatic and manual temperature compensation (0 ... 100.0 ° C) with NT 55 probe. Reference temperature (15 ... 30 ° C), Linear temperature coefficient (0.00 ... 10.00%), Selectable cell constant (C = 0.1 - 1-10.0). Display on the display of the standards used for calibration. Manual and automatic Data Logger function. Memory / recall up to 1000 data with date / time according to GLP. Intuitive management of parameters via icons. Multilingual menu. Alarm setting and display functions in analogue format, "Latch-reading" and "Stability" with titration mode, recalibration alarm, self-diagnosis messages. USB output for PC connection and RS232 port for printer connection. Numerical password for management of calibration and cancellation of memory. Magnetic stirrer with independent control. PC software downloadable for free. IP54 keyboard, warranty on the electronic part of 3 years.

Measurement rangepH -2.00 ... 16.00 (0.01 pH); mV-2000 ... + 2000 (1 mV); COND: 0.00 μS ... 200.0 mS; Salinity: 0.01 ... 100.0 ppt; TDS: 0.1 mg / l ... 100.0 g / l; °C -10 ... 110.0 (0.1 ° C);


Without pH electrode, S7/BNC cable, temperature probe NT 55, with cell conductivity epoxy 2301T 2-electrode (C = 1) with temperature probe integrated, support holders, magnetic stirrer with adjustable speed, buffers coloured, glasses for calibration with stirring bars and power supply.

PC 8+ DHS STIRRER Bench With electrode Polymer Without CELL

PC 8+ DHS STIRRER

Multiparameter pH, mV, COND, TDS, Salinity, Temperature, microprocessor digital benchtop instrument, resolution ± 0.1 / 0.01 pH / 0.01 μS. Large, backlit color graphic display. Simultaneous display of pH / COND and temperature. Automatic calibration from 1 to 3 points for pH according to GLP with date and time. Selectable NIST, USA and user definable buffers (2 values). Calibration report and innovative graphic representation. Display of the buffers used for calibration on the display. Manual or automatic temperature compensation with NT 55 probe. Automatic and manual conductivity calibration with recognition of 4 standards (84; 1413 μS, 12.88 and 111 mS) from 1 to 4 points with calculation of the different cell constants and a standard defined by the 'user. Automatic scale change, automatic and manual temperature compensation (0 ... 100.0 ° C) with NT 55 probe. Reference temperature (15 ... 30 ° C), Linear temperature coefficient (0.00 ... 10.00%), Selectable cell constant (C = 0.1 - 1-10.0). Display on the display of the standards used for calibration. Manual and automatic Data Logger function. Memory / recall up to 1000 data with date / time according to GLP. Intuitive management of parameters via icons. Multilingual menu. Alarm setting and display functions in analogue format, "Latch-reading" and "Stability" with titration mode, recalibration alarm, self-diagnosis messages. USB output for PC connection and RS232 port for printer connection. Numerical password for management of calibration and cancellation of memory. Magnetic stirrer with independent control. PC software downloadable for free. IP54 keyboard, warranty on the electronic part of 3 years.

Measurement rangepH -2.00 ... 16.00 (0.01 pH); mV-2000 ... + 2000 (1 mV); COND: 0.00 μS ... 200.0 mS; Salinity: 0.01 ... 100.0 ppt; TDS: 0.1 mg / l ... 100.0 g / l; °C -10 ... 110.0 (0.1 ° C);

Complete with glass electrode XS Polymer S7, S7/BNC cable, temperature probe NT 55, no cell conductivity, support holders, magnetic stirrer with adjustable speed, buffers coloured, glasses for calibration with stirring bars and power supply.

PC 8+ DHS STIRRER Without electrode Without CELL

PC 8+ DHS STIRRER

Multiparameter pH, mV, COND, TDS, Salinity, Temperature, microprocessor digital benchtop instrument, resolution ± 0.1 / 0.01 pH / 0.01 μS. Large, backlit color graphic display. Simultaneous display of pH / COND and temperature. Automatic calibration from 1 to 3 points for pH according to GLP with date and time. Selectable NIST, USA and user definable buffers (2 values). Calibration report and innovative graphic representation. Display of the buffers used for calibration on the display. Manual or automatic temperature compensation with NT 55 probe. Automatic and manual conductivity calibration with recognition of 4 standards (84; 1413 μS, 12.88 and 111 mS) from 1 to 4 points with calculation of the different cell constants and a standard defined by the 'user. Automatic scale change, automatic and manual temperature compensation (0 ... 100.0 ° C) with NT 55 probe. Reference temperature (15 ... 30 ° C), Linear temperature coefficient (0.00 ... 10.00%), Selectable cell constant (C = 0.1 - 1-10.0). Display on the display of the standards used for calibration. Manual and automatic Data Logger function. Memory / recall up to 1000 data with date / time according to GLP. Intuitive management of parameters via icons. Multilingual menu. Alarm setting and display functions in analogue format, "Latch-reading" and "Stability" with titration mode, recalibration alarm, self-diagnosis messages. USB output for PC connection and RS232 port for printer connection. Numerical password for management of calibration and cancellation of memory. Magnetic stirrer with independent control. PC software downloadable for free. IP54 keyboard, warranty on the electronic part of 3 years.

Measurement rangepH -2.00 ... 16.00 (0.01 pH); mV-2000 ... + 2000 (1 mV); COND: 0.00 μS ... 200.0 mS; Salinity: 0.01 ... 100.0 ppt; TDS: 0.1 mg / l ... 100.0 g / l; °C -10 ... 110.0 (0.1 ° C);


Without pH electrode and no cell
, with S7/BNC cable, temperature probe NT 55, support holders, magnetic stirrer with adjustable speed, buffers coloured, glasses for calibration with stirring bars and power supply.

PC 80+ DHS STIRRER with cell VPT 80/1 with Standard T-BNC DHS electrode

PC 80+ DHS STIRRER

Multi parameter pH, mV, ION, COND, TDS, Salinity, Resistivity, Temperature microprocessor digital benchtop meter, resolution ± 0.1 / 0.01 / 0.001 pH / 0.01 μS. Large, backlit color graphic display. Simultaneous vision pH / COND and Temperature. Manual or automatic temperature compensation with NT 55 probe. Manual and automatic Data logger function. Memory / recall up to 1000 data with date / time according to GLP. Automatic calibration from 1 to 5 points for pH according to GLP with date and time. Selectable buffer NIST, USA, DIN or user-definable (5 values). ISE calibration from 2 to 5 points. Calibration report and innovative graphic representation of the sensor conditions. Display on the display of the buffers used for calibration and electrode status. Automatic and manual conductivity calibration with recognition of 4 standards (84; 1413 μS, 12.88 and 111 mS) from 1 to 4 points with calculation of the different cell constants and a user-defined standard. Automatic scale change, automatic and manual temperature compensation (0 ... 100.0 ° C) with NT 55 probe. Reference temperature (15 ... 30 ° C), Linear temperature coefficient (0.00 ... 10.00%) and non-linear for ultra pure water. Selectable cell buffer (C = 0.1 - 1-10.0). Display on the display of the standards used for calibration. Intuitive management of parameters via icons. Multilingual menu. Enter company data, operator ID, sample ID and sensor ID via external keyboard (included). Alarm setting and display functions in analogue format, "Latch-reading" and "Stability" with titration mode and time stability for ISE. Recalibration alarm, self-diagnosis messages. Alphanumeric password for calibration management and memory cancellation. 2 USB outputs for external keyboard connection (included) and PC. RS232 port for printer connection.
Magnetic stirrer with independent control. Quick manual online. PC software downloadable for free. IP54 keyboard, warranty on the electronic part of 3 years.
 

Measurement range: pH -2,000 ... 20,000 (0,001 pH); mV -2000 ... + 2000 (0.1 mV); COND: 0.00 μS ... 1000.0 mS; Resistivity: 1 O ... 10 MW; Salinity: 0.01 ... 100.0 ppt; TDS: 0.1 mg / l ... 500.0 g / l; °C -20 ... 120.0 (0.1 ° C);

Complete with XS Standard T-BNC DHS pH electrode, VPT 80/1 conductivity cell Platinum glass with 2 electrodes (C=1) with built-in temperature probe, S7 / BNC cable, NT 55 temperature probe, electrode holder, external keyboard, magnetic stirrer with adjustable speed, colored pH buffers, standard conductivity and power supply. 

PC 80+ DHS STIRRER With Cell VPT 80-1 and electrode Standard

PC 80+ DHS STIRRER

Multi parameter pH, mV, ION, COND, TDS, Salinity, Resistivity, Microprocessor digital benchtop temperature, resolution ± 0.1 / 0.01 / 0.001 pH / 0.01 μS. Large, backlit color graphic display. Simultaneous vision pH / COND and Temperature. Manual or automatic temperature compensation with NT 55 probe. Manual and automatic data logger function. Memory / recall up to 1000 data with date / time according to GLP. Automatic calibration from 1 to 5 points for pH according to GLP with date and time. Selectable buffer NIST, USA, DIN or user-definable (5 values). ISE calibration from 2 to 5 points. Calibration report and innovative graphic representation of the sensor conditions. Display on the display of the buffers used for calibration and electrode status. Automatic and manual conductivity calibration with recognition of 4 standards (84; 1413 μS, 12.88 and 111 mS) from 1 to 4 points with calculation of the different cell constants and a user-defined standard. Automatic scale change, automatic and manual temperature compensation (0 ... 100.0 ° C) with NT 55 probe. Reference temperature (15 ... 30 ° C), Linear temperature coefficient (0.00 ... 10.00%) and non-linear for ultra pure water. Selectable cell buffer (C = 0.1 - 1-10.0). Display on the display of the standards used for calibration. Intuitive management of parameters via icons. Multilingual menu. Enter company data, operator ID, sample ID and sensor ID via external keyboard (included). Alarm setting and display functions in analogue format, "Latch-reading" and "Stability" with titration mode and time stability for ISE. Recalibration alarm, self-diagnosis messages. Alphanumeric password for calibration management and memory cancellation. 2 USB outputs for external keyboard connection (included) and PC. RS232 port for printer connection.
Magnetic stirrer with independent control. Quick manual online. PC software downloadable for free. IP54 keyboard, warranty on the electronic part of 3 years.
 

Measurement range: pH -2,000 ... 20,000 (0,001 pH); mV -2000 ... + 2000 (0.1 mV); Conductivity: 0.00 μS ... 1000.0 mS; Resistivity: 1 O ... 10 MW; Salinity: 0.01 ... 100.0 ppt; TDS: 0.1 mg / l ... 500.0 g / l; °C -20 ... 120.0 (0.1 ° C);

Complete with XS Standard pH electrode, VPT 80/1 conductivity cell Platinum glass with 2 electrodes (C = 1) with built-in temperature probe, S7 / BNC cable, NT 55 temperature probe, electrode holder, external keyboard, magnetic stirrer with adjustable speed, colored pH buffers, standard conductivity and power supply.

PC 80+ DHS STIRRER Bench With Cell VPT 80-1 Without electrode

PC 80+ DHS STIRRER

Multi parameter pH, mV, ION, COND, TDS, Salinity, Resistivity, Microprocessor digital benchtop temperature, resolution ± 0.1 / 0.01 / 0.001 pH / 0.01 μS. Large, backlit color graphic display. Simultaneous vision pH / COND and Temperature. Manual or automatic temperature compensation with NT 55 probe. Manual and automatic data logger function. Memory / recall up to 1000 data with date / time according to GLP. Automatic calibration from 1 to 5 points for pH according to GLP with date and time. Selectable buffer NIST, USA, DIN or user-definable (5 values). ISE calibration from 2 to 5 points. Calibration report and innovative graphic representation of the sensor conditions. Display on the display of the buffers used for calibration and electrode status. Automatic and manual conductivity calibration with recognition of 4 standards (84; 1413 μS, 12.88 and 111 mS) from 1 to 4 points with calculation of the different cell constants and a user-defined standard. Automatic scale change, automatic and manual temperature compensation (0 ... 100.0 ° C) with NT 55 probe. Reference temperature (15 ... 30 ° C), Linear temperature coefficient (0.00 ... 10.00%) and non-linear for ultra pure water. Selectable cell buffer (C = 0.1 - 1-10.0). Display on the display of the standards used for calibration. Intuitive management of parameters via icons. Multilingual menu. Enter company data, operator ID, sample ID and sensor ID via external keyboard (included). Alarm setting and display functions in analogue format, "Latch-reading" and "Stability" with titration mode and time stability for ISE. Recalibration alarm, self-diagnosis messages. Alphanumeric password for calibration management and memory cancellation. 2 USB outputs for external keyboard connection (included) and PC. RS232 port for printer connection.
Magnetic stirrer with independent control. Quick manual online. PC software downloadable for free. IP54 keyboard, warranty on the electronic part of 3 years.
 

Measurement rangepH -2,000 ... 20,000 (0,001 pH); mV -2000 ... + 2000 (0.1 mV); Conductivity: 0.00 μS ... 1000.0 mS; Resistivity: 1 O ... 10 MW; Salinity: 0.01 ... 100.0 ppt; TDS: 0.1 mg / l ... 500.0 g / l; °C -20 ... 120.0 (0.1 ° C);

Without pH electrode, cable S7 / BNC, temperature probe NT 55, with cell conductivity VPT 80/1 glass Platinum 2-electrode(C = 1) with temperature probe integrated, support holders, magnetic stirrer with adjustable speed, buffers coloured,glasses for calibration with stirring bars, software for downloading data and power supply.

PC 80+ DHS STIRRER With electrode Standard Without Cell

PC 80+ DHS STIRRER

Multi parameter pH, mV, ION, COND, TDS, Salinity, Resistivity, Microprocessor digital benchtop temperature, resolution ± 0.1 / 0.01 / 0.001 pH / 0.01 μS. Large, backlit color graphic display. Simultaneous vision pH / COND and Temperature. Manual or automatic temperature compensation with NT 55 probe. Manual and automatic data logger function. Memory / recall up to 1000 data with date / time according to GLP. Automatic calibration from 1 to 5 points for pH according to GLP with date and time. Selectable buffer NIST, USA, DIN or user-definable (5 values). ISE calibration from 2 to 5 points. Calibration report and innovative graphic representation of the sensor conditions. Display on the display of the buffers used for calibration and electrode status. Automatic and manual conductivity calibration with recognition of 4 standards (84; 1413 μS, 12.88 and 111 mS) from 1 to 4 points with calculation of the different cell constants and a user-defined standard. Automatic scale change, automatic and manual temperature compensation (0 ... 100.0 ° C) with NT 55 probe. Reference temperature (15 ... 30 ° C), Linear temperature coefficient (0.00 ... 10.00%) and non-linear for ultra pure water. Selectable cell buffer (C = 0.1 - 1-10.0). Display on the display of the standards used for calibration. Intuitive management of parameters via icons. Multilingual menu. Enter company data, operator ID, sample ID and sensor ID via external keyboard (included). Alarm setting and display functions in analogue format, "Latch-reading" and "Stability" with titration mode and time stability for ISE. Recalibration alarm, self-diagnosis messages. Alphanumeric password for calibration management and memory cancellation. 2 USB outputs for external keyboard connection (included) and PC. RS232 port for printer connection.
Magnetic stirrer with independent control. Quick manual online. PC software downloadable for free. IP54 keyboard, warranty on the electronic part of 3 years.
 

Measurement rangepH -2,000 ... 20,000 (0,001 pH); mV -2000 ... + 2000 (0.1 mV); Conductivity: 0.00 μS ... 1000.0 mS; Resistivity: 1 O ... 10 MW; Salinity: 0.01 ... 100.0 ppt; TDS: 0.1 mg / l ... 500.0 g / l; °C -20 ... 120.0 (0.1 ° C);

Complete with glass electrode XS Standard S7
, S7/BNC cable, temperature probe NT 55, no cell conductivity, support holders, magnetic stirrer with adjustable speed, buffers coloured, glasses for calibration with stirring bars , software for downloading the data and power supply.

PC 80+ DHS STIRRER Without electrode Without CELL

PC 80+ DHS STIRRER

Multi parameter pH, mV, ION, COND, TDS, Salinity, Resistivity, Microprocessor digital benchtop temperature, resolution ± 0.1 / 0.01 / 0.001 pH / 0.01 μS. Large, backlit color graphic display. Simultaneous vision pH / COND and Temperature. Manual or automatic temperature compensation with NT 55 probe. Manual and automatic data logger function. Memory / recall up to 1000 data with date / time according to GLP. Automatic calibration from 1 to 5 points for pH according to GLP with date and time. Selectable buffer NIST, USA, DIN or user-definable (5 values). ISE calibration from 2 to 5 points. Calibration report and innovative graphic representation of the sensor conditions. Display on the display of the buffers used for calibration and electrode status. Automatic and manual conductivity calibration with recognition of 4 standards (84; 1413 μS, 12.88 and 111 mS) from 1 to 4 points with calculation of the different cell constants and a user-defined standard. Automatic scale change, automatic and manual temperature compensation (0 ... 100.0 ° C) with NT 55 probe. Reference temperature (15 ... 30 ° C), Linear temperature coefficient (0.00 ... 10.00%) and non-linear for ultra pure water. Selectable cell buffer (C = 0.1 - 1-10.0). Display on the display of the standards used for calibration. Intuitive management of parameters via icons. Multilingual menu. Enter company data, operator ID, sample ID and sensor ID via external keyboard (included). Alarm setting and display functions in analogue format, "Latch-reading" and "Stability" with titration mode and time stability for ISE. Recalibration alarm, self-diagnosis messages. Alphanumeric password for calibration management and memory cancellation. 2 USB outputs for external keyboard connection (included) and PC. RS232 port for printer connection.
Magnetic stirrer with independent control. Quick manual online. PC software downloadable for free. IP54 keyboard, warranty on the electronic part of 3 years.
 

Measurement rangepH -2,000 ... 20,000 (0,001 pH); mV -2000 ... + 2000 (0.1 mV); Conductivity: 0.00 μS ... 1000.0 mS; Resistivity: 1 O ... 10 MW; Salinity: 0.01 ... 100.0 ppt; TDS: 0.1 mg / l ... 500.0 g / l; °C -20 ... 120.0 (0.1 ° C);

Without pH electrode and no cell, with cable S7/BNC, temperature probe NT 55, support holders, magnetic stirrer with adjustable speed, buffers coloured, glasses for calibration with stirring bars, software for downloading data and power supply.

Accessories

No Articles